DIY Air Conditioner Dresser

Hey friends! Today we’re building the “coolest” dresser you’ve ever seen! It’s a cover designed to hide a window air conditioner when it’s not in use. The cool part is the cover looks like an attractive dresser. This DIY air conditioner dresser is no sweat to build… c’mon I’ll show you how to do it!

This is the “coolest” DIY dresser you’ll ever build! It’s the shell of a dresser that slides over an air conditioner when not in use. It’s like a cozy for your a/c!

For your convenience this post contains affiliate links to products or tools I used to complete this project. Click here to visit my site policies.

Where do you store your air conditioner when you take it out of the window in the fall? Just thinking about taking out my second floor bedroom window air conditioner makes me perspire, in fact, I put on a double dose of cedarwood deodorant when it comes time to take it out! The stairs to my bedroom are steep and narrow (please ignore the painter’s tape in the stair pic) I mean I’ve taken a tumble down the stairs just carrying a pair of socks! So I don’t look forward to carrying the air conditioner down the stairs to the garage.

Storing the air conditioner in the bedroom closet isn’t really an option either. The air conditioner is just a little too large to fit. For the past couple of years I’ve just left the air conditioner on the floor in front of the window. Window air conditioners are ugly to begin with, but looking at it sit on the floor for months is really UGLY!

The “coolest” dresser ever! This DIY dresser hides an air conditioner when not in use! Plans at www.sawsonskates.com

I could do better and this is what I came up with… the “coolest” dresser you’ve ever seen! The air conditioner cover is essentially the shell of a small dresser. It’s like a cozy for your air conditioner!

The “coolest” dresser ever! This DIY dresser hides an air conditioner when not in use! Plans at www.sawsonskates.com

Build, slide and hide. No one would EVER guess there is an air conditioner hiding under here, plus it provides a great place for decor items like plants or a lamp. You have to admit, this DIY air conditioner dresser is waaay better to look at than an ugly air conditioner!

This is the “coolest” DIY dresser you’ll ever build! It’s the shell of a dresser that slides over an air conditioner when not in use. It’s like a cozy for your a/c!

DIY Air Conditioner Dresser Plan

Printed Plan
Click here to download a PDF of the DIY Air Conditioner Plan

Supplies
(4) 1x2x8
(2) 1x8x8
1/2″ plywood 24″ x 24″
1/4″ plywood 24″ x 48″
3/4″ brad nails
1″ pocket screws
1-1/4″ pocket screws
2″ wood screws
Wood glue
Rust-Oleum Dark Walnut Ultimate Wood Stain
4 knobs or handles

Tools
Stanley FatMax Tape Measure
Miter saw
Table saw
DeWALT Drill
Kreg Jig
Countersink drill bit

Step 1. Cut the Stiles. Cut 6 pieces of 1×2 to 21-1/4″. 2 stiles will be used for the front and 4 will be used on the sides.

Step 2. Cut the Front Rails. Cut 3 pieces of 1×2 to 23-3/4″. Drill one pocket hole in each end of the rail.

Step 3. Cut the Drawer Fronts. Cut 2 pieces of 1×8 to 23-3/4″ and rip to 6-7/8″. Drill 2 pocket holes in each end. Drill 3 pocket holes in the top and bottom edge.

The “coolest” dresser ever! This DIY dresser hides an air conditioner when not in use! Plans at www.sawsonskates.com

On the front side drawer, roundover the edges with sandpaper. This will make the drawer front look more like a real drawer.

The “coolest” dresser ever! This DIY dresser hides an air conditioner when not in use! Plans at www.sawsonskates.com

Step 4. Assemble the Front. Layout 2 stiles, place a rail at the top, then a drawer front, then a rail, then the last drawer front, the final rail and clamp together.

dThe

Flip the assembly to the front side and gently remove the drawer fronts.

The “coolest” dresser ever! This DIY dresser hides an air conditioner when not in use! Plans at www.sawsonskates.com

With the drawer fronts removed, roundover the drawer openings. Just like rounding over the drawer fronts, this will give the illusion that it’s an actual drawer.

The “coolest” dresser ever! This DIY dresser hides an air conditioner when not in use! Plans at www.sawsonskates.com

Replace the drawer fronts. Attach the rails to the stiles using 1-1/4″ pocket screws. Then attach the drawer fronts to the rails and stiles using 1-1/4″ pocket screws. On the back (same side as the other pocket holes) drill 4 pocket holes along the top edge. These pocket holes will be used to attach the front to the top.

The “coolest” dresser ever! This DIY dresser hides an air conditioner when not in use! Plans at www.sawsonskates.com

Step 5. Cut the Side Rails. Cut 6 pieces of 1×2 to 13″ and drill a pocket hole in each end.

Step 6. Cut the Side Panels. Cut 4 pieces of 1/2″ plywood to 13″ x 6-7/8″. Set your Kreg jig to drill into 1/2″ material and drill a few pocket holes around the edges. Note: For my side panels, I used 1×8 pine that I resawed on my band saw and then planed to 1/2″. If you have access to a band saw and a planer, you can do it just like I did. If not, use the plywood method described above.

The “coolest” dresser ever! This DIY dresser hides an air conditioner when not in use! Plans at www.sawsonskates.com

Step 7. Assemble the Sides. Place side parts face up on your workbench. Layout 2 stiles, place a rail at the top, then a side panel, then a rail, then the second side panel, the final rail and clamp together. Note: the side panels set in about 1/4″ from the front edge of the stiles and rails.

The “coolest” dresser ever! This DIY dresser hides an air conditioner when not in use! Plans at www.sawsonskates.com

Flip the side assembly over and attach the rails to the stiles using 1-1/4″ pocket screws. Then attach the panels to the rails and stiles using 1″ pocket screws.

The “coolest” dresser ever! This DIY dresser hides an air conditioner when not in use! Plans at www.sawsonskates.com

On the back (same side as the other pocket holes) drill pocket holes in the top of each stile and the middle of the rail. These pocket holes will be used to attach the side to the top. Also drill 3 pocket holes in the front stile. These pocket holes will be used to attach the side to the front. Be sure to make a right and left side panel. Repeat Step 7 for the second side.

The “coolest” dresser ever! This DIY dresser hides an air conditioner when not in use! Plans at www.sawsonskates.com

Step 8. Attach the Sides to the Front. Clamp the side to the front making sure the pocket hole screws in the side stiles face the front assembly. Attach using 1-1/4″ pocket screws.

The “coolest” dresser ever! This DIY dresser hides an air conditioner when not in use! Plans at www.sawsonskates.com

Step 9. Cut and Install the Back Brace. Cut a 1×2 to 25-1/4″ and drill a pocket hole in each end. Clamp at the top of the sides and attach using 1-1/4″ pocket screws.

The “coolest” dresser ever! This DIY dresser hides an air conditioner when not in use! Plans at www.sawsonskates.com

Step 10. Make the Top. Cut 3 pieces of 1×8 to 28″ and rip to 5-3/4″. Drill pocket holes in the edge of 2 pieces. Clamp pieces and attach using 1-1/4″ pocket screws.

The “coolest” dresser ever! This DIY dresser hides an air conditioner when not in use! Plans at www.sawsonskates.com

Step 11. Attach the Top. Place the top on the cabinet with the back of the top flush with the back of the cabinet and center top side to side on the cabinet. Clamp the top to the cabinet and attach using 1-1/4″ pocket screws. Drill a few countersink holes in the bottom of the back brace and attach using 2″ wood screws.

The “coolest” dresser ever! This DIY dresser hides an air conditioner when not in use! Plans at www.sawsonskates.com

Step 12. Cut and Attach the Toe Kicks. Cut 2 pieces of 1/4″ plywood to 3-1/2″ x 16″ and 1 piece to 3-1/2″ x 24-3/4″. Attach the 16″ toe kick to each side with 3/4″ brad nails, then attach the 24-3/4″ to the front with 3/4″ brad nails. Note: For my toe kicks, I used 1×4 pine that I resawed on my band saw and then planed to 1/4″. If you have access to a band saw and a planer, you can do it just like I did. If not, use the plywood method described above.

The “coolest” dresser ever! This DIY dresser hides an air conditioner when not in use! Plans at www.sawsonskates.com

Step 13. Sand, Stain and Finish. I sanded the piece using 120 grit sandpaper and stained with Rust-Oleum Dark Walnut Ultimate Wood Stain. The piece was finished with a few applications of this top coat.

Thank you for stopping by to check out my DIY Air Conditioner Dresser!

PIN THIS!

This is the “coolest” DIY dresser you’ll ever build! It’s the shell of a dresser that slides over an air conditioner when not in use. It’s like a cozy for your a/c!

18 Comments

      1. Hey Barry – Yes, you sent me two pics… one before you stained it and one finished. And I’m jealous because I think yours turned out better than mine!

  1. ❤️ this idea. ❤️ that you like to some of the materials. Would love to see a rough total cost of project on future posts.

    1. The air conditioner dresser is used for storing the air conditioner in the winter months when it’s not in use.

    1. Hi Linda – Thank you for stopping by. It’s about the size of an average nightstand. It measures about 28″w x 22″h x 17-1/4″d.

  2. What about doing a similar box/dresser that camouflages the air conditioner while in use? It would be easy enough to outfit the areas near air inlet and outlets with a decorative (pierced) aluminum sheet.

      1. I believe using it while running will restrict air flow and cause Problems, such as Over heating which will shorten the AC life span

COMMENTS

This site uses Akismet to reduce spam. Learn how your comment data is processed.