Facebook Pinterest Instagram StumbleUpon Twitter RSS
 

How to: Stencil a Designer Lamp with Cutting Edge Stencils

June 22, 2015 by Scott - Saws on Skates

how to stencil a designer lamp

When Hometalk invited me to make a project using stencils the first thing I thought was… I haven’t used stencils since I was in elementary school – how I’m going to make something cool with stencils?!

Then I went to the Cutting Edge Stencils website. Man, was I WRONG! These aren’t your elementary school stencils. These stencils are grown up, sophisticated, modern and funky! Many of the stencils are for large projects like walls, but there are also stencils for smaller projects like furniture. That’s where I found the stencil for my project – a pattern called “Fusion” size small. Once I ordered my stencil, it arrived lightning fast. If I didn’t know better, I would have thought they delivered it with a drone!

cutting edge stencils package sos

fusion

Now that I had chosen a design, I needed to decide what I was going to stencil. Again I went to the Cutting Edge Stencils website for inspiration. There are many project ideas on their site to get your creative juices flowing. Walls, curtains, pillows and furniture projects like dressers, tables, chairs and more. I knew I wanted to make a unique project. Something as unique as Cutting Edge Stencils. There was one project I didn’t see there and that’s what I was going to make…

Here’s the before…

lamp before sos

And here’s the after…

lamp finished sos

The tagline of my blog is “Big impact projects in a small space” and without a doubt there is big impact packed in the small space of this lamp! I designed and built this project exclusively for Cutting Edge Stencils! I don’t like common and this lamp is anything but! Starting with the uncommon rectangular shape to the bold Fusion stencil. This project looks complicated, but is easy to do. You too can have a designer looking lamp that you made yourself.

lamp finished 2 sos

Click here for the FREE Lamp plans!

If you followed the lamp plans, the nail holes have been filled, sanded and your project has been primed. This is where this tutorial picks up…

Let’s get started!!!

Stencil a Designer Lamp with Cutting Edge Stencils

Supplies
Bittersweet Chocolate (Brown) acrylic craft paint
Behr “Gem Turquoise” (Home Depot)
“Fusion” Cutting Edge Stencil, size small
Roller
Foam Roller Cover
Painter’s tape
1/4″ automotive pinstripe (or 1/4″ painter’s tape if you can find it)
Painter’s tape

Step 1
Paint the box turquoise.

Step 2
I wanted to “frame” my stencil with a painted a border around the edge of the lamp. Measure in 3/8″ on all sides and mask using painter’s tape, paint the exposed area (around the edges) brown and remove painter’s tape. It’s also a good idea to paint the top and bottom (not attached) at this time.

stencil border 1

stencil border 2

stencil border 3

stencil border 4

Step 3
To finish the frame/border look, I applied automotive pinstripe next to the brown that was just painted (the pinstripe will be removed later). Then position the stencil and secure in place with painter’s tape.

stencil border 5

stencil 1

Step 4
Pour a few tablespoons of the brown paint into a paper plate. Roll the roller into the paint, then roll on paper towel to remove excess paint. The roller should look nearly dry. It’s important the roller is properly loaded with paint. I would recommend rolling on a few pieces of scrap first to be sure it’s properly loaded before starting on your project. Once your roller is properly loaded, roll over the stencil using medium pressure.

stencil 2

stencil 3

stencil 4

Step 5
On the front and back sections, position the stencil, roll, then reposition the stencil and roll again to finish the pattern.

stencil 5

Step 6
Clean your stencil (the clean up is really easy!) and admire your work! Oh yeah, you have to attach the top, bottom and wire the lamp. Click here to go back to the Lamp assembly tutorial.

Thank you to Hometalk for inviting me to do this project and to Cutting Edge Stencils for totally changing my mind about stencils! Be sure to check out their website for a HUGE selection of stencils and decorating ideas. You can do this! The instructions are easy to follow and the results are nothing less than AMAZING!

lamp finished 1 sos


DID YOU ENJOY THIS POST?

I'd love to share more free plans with you, would you stick around? Please add your email address below to receive Saws on Skates updates delivered to your inbox!


 

One thought on “How to: Stencil a Designer Lamp with Cutting Edge Stencils

  1. […] like to introduce Scott, a DIY guru featured on Hometalk and the blogger behind Saws on Skates.  Remember when we told you all about the Hometalk #Shareathon?  Well Scott was a participant and […]

Leave a Reply

Search

Latest Videos

Popular DIY Projects

%d bloggers like this: