DIY Wooden Tabletop Pumpkins (2 Sizes)
Fall in love with these adorable upcycled scrap wood pumpkins. This easy DIY project is perfect for adding rustic charm to your autumn decor.
Add a natural touch to your fall decor with these charming wooden pumpkin shelf sitters. Made from a few pieces of scrap wood, they’re a simple afternoon project, adding a warm, inviting feel to any space. Whether celebrating Halloween or Thanksgiving or decorating for the entire autumn season, they’re perfect for your mantel, sideboard, or tablescape.
Table of Contents
This article contains affiliate links. If you purchase from these links, I may earn a small commission at no additional cost to you. Visit my site policies for more information.
Inspiration for This Project
I recently stumbled across a wooden pumpkin idea on a Facebook group, and it was like a lightbulb went off. I knew I could put my own spin on it using leftover wood lying around my workshop.
I’m not trying to brag, but I think my version turned out gourd-ous. It looks like something you might find at a store like Marshalls, TJ Maxx, or Target. And I love that they’re not the usual orange, so they’re perfect to display the entire fall season.
What Wood Should You Use?
The piece that inspired this project was made with orange-painted pine 2×2s. I had some leftover cedar scraps from making this log cabin bird feeder, and the reddish/orange color reminded me of a pumpkin. So, I thought the “logs” would be perfect for this project. While I used cedar for my pumpkins, you could use almost any kind of wood and any size to make yours.
What Tools Do You Need?
I used four tools to make my tabletop pumpkins:
- Table Saw
- Miter Saw
- Pin Nailer
Optional: I also used my trim router and a roundover bit to give the wood a rounded appearance. You can achieve a similar look with sandpaper, but it will take a little longer.
How to Make DIY Wooden Tabletop Pumpkins
Printed Plan
Get the PDF plan here (includes detailed instructions, measurements, and bonus tips)
Materials
- Wood (per the printed plan)
- Wood Glue
- 1” Pin Nails
Tools
- Tape Measure
- Miter Saw
- Table Saw
- Pin Nailer or Hammer
- Trim Router and Roundover Bit (optional)
Before You Begin
I had some leftover cedar scraps from building this log cabin bird feeder that I used to make this project, but you can adjust the pumpkin’s dimensions to use almost any cutoffs you have on hand.
The leftover “logs” were made using my table saw and a push block to rip them to width.
Related: 21 Table Saw Safety Rules (& Mistakes to Avoid)
Using my trim router and a roundover bit, I removed the sharp edges, giving them a softer appearance. You can use sandpaper if you don’t have a router.
Step 1. Cut the Parts
I thought it was easiest to cut all of the parts, working from the center outward, and then assemble the pumpkins.
IMPORTANT: Be careful when cutting these small pieces. Keep your hand away from the blade.
To make the stem, I first cut an angle using my miter saw.
Then, I measured from the top of the stem and cut it to length.
Next, I cut two pieces to length.
I cut an angle, placed it against a the piece I just cut, and marked it for length. Then, I made a second angled cut.
I repeated this step for the second side.
Step 2. Assemble the Pumpkin
Working from the stem outward, I applied glue, positioned a piece on the stem, and attached it using pin nails.
I repeated this step for the second piece.
I applied glue to a side, positioned it on the assembly, and attached it using pin nails.
I repeated this step for the second side.
That’s it. Your pumpkin is ready to display.
Includes:
- List of tools and materials
- Complete measurements (in inches)
- Easy-to-follow instructions
- Step-by-step photos
- Detailed diagrams
Final Thoughts
And there you have it. These quick, easy, and oh-so-charming wooden pumpkins are a perfect way to add a touch of fall warmth to your home.
Don’t wait. Get your PDF plan (including the detailed instructions and measurements) now!
Thank you for stopping by. If you enjoyed this tutorial, would you please take a moment and pin it to Pinterest? I’d really appreciate it!