13+ Laser Cut Christmas Ornaments for Your Tree and Gift List

This post contains affiliate links. If you buy through them, I may earn a small commission at no extra cost to you. As an Amazon Associate, I earn from qualifying purchases. Read my full disclosure policy.

13+ laser cut Christmas ornament ideas, from layered cardinals and 3D stars to a folk art black cat, to fill your tree or give as handmade gifts.

Four image collage of laser cut Christmas ornaments

Christmas ornaments are one of the easiest projects you can make with a laser, and they make great handmade gifts. I rounded up 13+ laser cut ornament ideas from some of my favorite makers, from layered cardinals and 3D stars to a folk art black cat and a Santa tracker, so you can fill your own tree or make a batch for friends and family.

I cut my laser projects on an xTool P3, but most of these designs will work on any laser that cuts thin plywood. If you’re new to lasers, I walk through how I cut wood with the xTool P3 step by step.

This article contains affiliate links. If you purchase from these links, I may earn a small commission at no additional cost to you. Visit my site policies for more information.

What You’ll Need

  • Laser cutter: I use the xTool P3. You can read my full xTool P3 review if you’re deciding on a laser.
  • Honeycomb panel: It keeps small ornament pieces from shifting or falling through the bed while they cut. I use the Honeycomb Panel for P3, so look for one made to fit your laser.
  • Basswood or plywood sheets
  • Acrylic sheets
  • Paint, glue, and ribbon for finishing and hanging

Laser Cut Christmas Ornament Ideas

1
Angled view of a folk art cat ornament on silver-colored wood with two sprigs of pine.
Folk Art Black Cat Ornament
My folk art black cat has a soft cream face, paws, and tail tip with a little texture, almost like fur. A small collar and heart finish the front, and it hangs from a loop of twine through the tail.
Continue reading
2
Three laser cut winter-scene Christmas ornaments featuring a child and their dog
Child and Dog Winter-Scene Ornaments
A child and their dog sit side by side, looking out over a snowy scene in this set of three layered ornaments. One overlooks a village with a church steeple, one shows a snowman waving from a hillside, and the third looks toward a cabin with smoke curling from the chimney. Look for the tiny heart between the child and the pup on the cabin ornament.
Continue reading
3
Laser cut two-tone cardinal Christmas ornament
Sustain My Craft Habit
Two-Tone Layered Cardinal
Jane and Sonja's cardinal pairs a dark body with a lighter middle layer, giving the bird two tones and a little depth. Fine lines pick out its beak and eye.
Continue reading
4
Mom Envy
Santa Tracker Ornament
Laura's Santa tracker ornament shows Santa and his reindeer flying across the front. A QR code on the ornament links to a site that follows his sleigh on Christmas Eve.
Continue reading
5
Acrylic and wood laser cut Christmas ornaments
Ruffles and Rain Boots
Acrylic and Wood Overlay Ornaments
Sarah's ornaments set reindeer, trees, and pine branches against clear acrylic backgrounds. Hung on the tree, the lights shine right through.
Continue reading
6
Gingerbread men with names on a teal cookie jar shape laser cut Christmas ornament
The Country Chic Cottage
Personalized Cookie Jar Ornament
Angie's teal cookie jar ornament says “Grandma's Perfect Batch,” with a gingerbread for each grandchild. Each cookie carries a name, and the label can say Mom, Gigi, or whatever your family calls her.
Continue reading
7
Mom Envy
Cardinal Keepsake Ornament
Laura's ornament puts a small cardinal beside the words “Cardinals appear when angels are near.” It's a quiet way to remember someone at Christmas.
Continue reading
8
Three laser cut star-shaped Christmas ornaments hanging on a white Christmas tree
Happiness is Homemade
3D Star Ornaments
Heidi's 3D stars remind her of the Star of Bethlehem, with points facing every direction on the branch. Paint them in your tree's colors or leave them natural.
Continue reading
9
Traditional ornament-shaped laser cut Christmas ornament painted teal and silver
Craft Klatch
Aqua Gift Tag Ornament
Mona's ornament has an aqua tint, silver sparkle over the design, and a thin ribbon at the top. It doubles as a gift tag with a name on the back, then moves to the tree once the gift is open.
Continue reading
10
Collage of three laser cut Christmas ornaments
The Handyman’s Daughter
3 Laser Cut Ornament Ideas
Vineta shares three ornaments in one post: a tree filled with red and green glitter, a snowflake that shifts color in the light, and a tally of how many ornaments the cat has knocked off the tree. The cat counter has space at the bottom for a name.
Continue reading
11
DIY Danielle
Cardinal Memorial Ornament
Danielle’s memorial ornament reads “I am always with you” beside a red cardinal, with a loved one’s name and dates below.
Continue reading
12
Snowman, stocking, angel and tree laser cut Christmas ornaments
Morena’s Corner
Layered Christmas Ornaments
Morena's ornaments include an angel, snowman, and a Christmas tree, each with a lacy top layer over a contrasting color underneath. A dusting of fine white sparkle on top catches the light on the branch.
Continue reading
13
Layered nativity laser cut Christmas ornament
Doodlecraft
Layered Nativity Ornament
Natalie's nativity ornament sets a silhouette of the Holy Family over a background filled with names for Jesus. Gold accents and a white bow finish the top.
Continue reading
14
Laser-cut Santa Claus Christmas ornament hanging from a white tree
Hey, Let’s Make Stuff
Color-Your-Own Santa and Snowman Ornaments
Cori's Santa and snowman ornaments come with the details already outlined, so kids can color them in with markers. Grown-ups can paint them too, and each one has a hole at the top for a ribbon hanger.
Continue reading

Pin This For Later

Four image collage with a text overlay that says 11+ Laser Cut Christmas Ornaments for Your Tree and Gift List

COMMENTS

This site uses Akismet to reduce spam. Learn how your comment data is processed.