Hey there friends! Today we’re going to discuss one of my least favorite DIY activities… sanding. Sanding is the worst! It’s dirty, dusty and can be dangerous. Not to mention it kills my carpal tunnel wrist, but that’s another story! Today I will share six of my sanding secrets and show you how to sand your DIY project for a flawless finish.
For your convenience, this post contains affiliate links to supplies or tools I used to complete this project. Purchases made using these links help support the Saws on Skates website and allow me to share more DIY projects. and DIY tips with you. There is no cost to you for using these links. Click here to visit my site policies.
A quality finish for your DIY furniture project starts with the prep of the wood. A poorly prepped surface often means you can see scratches on your finished project. Just like prepping the metal surface of a car body for paint, we must meticulously prep our wood projects for a flawless finish.
Before we get into the secrets, we are all familiar with the different grits of sandpaper, right? The lower the number, the more coarse or aggressive the sandpaper. In other words, a 60 grit sandpaper will remove large amounts of wood quickly and leave the surface rough. A 120 grit sandpaper will remove wood less quickly, but leave the surface smooth and ready for paint or stain.
It’s always best to use the least aggressive grit necessary to smooth the wood. For instance, I usually start with 100 grit and then finish with 120 grit sandpaper on most of my DIY furniture projects. It’s rare that I need to start with 80 grit unless I have some deep gouges or ill fitting joints.
Before we start any sanding project we MUST protect ourselves. The sawdust produced when sanding, in particular, the fine dust that is too small for us to see, can be extremely dangerous for our lungs. Whenever I’m in the workshop I wear a dust mask. In the past I used disposable dust masks, but recently switched to a this respirator. Below is the one I’m currently using. This dust mask tightens on top of your head and around your chin to provide a secure fit. I also like that it has replaceable filters.
We must also protect our eyes while sanding. I don’t know about you, but having sawdust scratch my eyes is not my idea of fun! Wrap around safety glasses with a foam gasket are great way to keep sawdust out of eyes.
How to Sand Your DIY Project for a Flawless Finish
Don’t Play the Chase Game
We have all done this. We place a part we need to sand on our workbench, start the electric sander, place the sander on the wood and start chasing the wood around our workbench! There has to be a better way and there is. When I sand the parts for my projects I do it on a non-slip router pad. The rubber grips to the parts and minimizes the “chase game” around the workbench. Sure, the parts still move a bit, but nothing like they do without the pad. For people like me who don’t like sanding, the non-slip router pad makes the task a little more tolerable. Plus you can also use it with your router and sanding block too.
Let There Be Light
If you’re not using a light when you’re sanding, you’re not seeing the whole picture. Have you ever sanded, thought the surface looked perfect, applied some stain and a finish like poly only to discover the surface is covered in scratches? How do you avoid it? With a utility light or clamp light. I use both depending on the project. Set the light so it shoots across the surface of the wood. The light will catch any of the imperfections in the surface, so I can fix them before I apply paint or stain.
Speaking of light, or lack of light, my workshop was sooo dark. I recently replaced my old, dim fluorescent workshop lights and the difference is like night and day… literally! Do you have fluorescent lights in your workshop? Here are 7 reasons why you NEED to replace your old workshop lights.
Go with the Grain
I think we all know this rule, but it bears repeating, always sand with the direction of the grain of the wood. As with any rule, there are exceptions. An exception like a stubborn knot or a bulge in the wood you can’t get level with the surrounding area. In an extreme situation like this, you can sand diagonally to the grain. But keep in mind, you will still have to do your final sanding with the grain and it will take quite a bit of effort to remove those diagonal sand marks. So it’s always best to sand with the grain and only use the diagonal technique in extreme situations.
For extreme conditions and stubborn surface irregularities, you can sand diagonally…
Then finish sanding with the grain of the wood.
I use a sanding block for quick touch ups, but I primarily use an electric sander for any project that requires a lot of sanding. What’s my go-to electric sander? A random orbit sander. I never use a palm sander! Here’s why… most palm sanders move in one direction. Have you ever used a palm sander and later found figure “8s” on the surface of your project? (don’t forget to use the utility light to spot scratches before you apply a finish!) The reason this happens is because the sander moves in one, circular direction which produces those little figure “8s”. Random orbit sanders move in multiple directions, almost entirely eliminating those figure “8s”. It’s still a good idea to use a utility light or clamp light though.
Ease the Edges
I saved my best tip for last and it’s also a pet peeve of mine. Nothing drives me crazier than seeing a DIY furniture project sanded to perfection, but the piece has raw, “sharp” edges. When you see a store bought piece of furniture the corners are just ever so slightly eased or “knocked down”. This helps the piece to look finished and also helps the edges to resist denting and chipping. All it takes is 2-3 passes with a sanding block to make your piece look finished. If you want a more rustic or “country” look continue sanding to give the edges a rounded look.
On a related note, it’s also a good idea to slightly sand a bevel on the bottoms of table legs, etc. Straight edges get caught when sliding the piece and tend to chip and tear out the leg. Sanding a bevel helps to reduce chipping and tearing.
DIY Wood Filler
Sometimes after sanding you may notice nail holes or small gaps or cracks in the wood. You could buy a wood filler, but I like to DIY my own. My DIY wood filler is made with the sanding dust from my project, so I know will match my DIY furniture project. Learn how to make your own wood filler here.
Apply a Tea Stain
Now that you’re DIY furniture project has been properly prepped you’ll need to apply a coating to protect your project for years to come. For an easy wipe-on finish, I make my own DIY finish. Bob’s DIY finish for wood is made with just three ingredients and is easy to apply with just a rag.
When I need a more durable finish I spray several coats of polyurethane with my HomeRight Super Finish Max sprayer. Spraying polyurethane is sooo much easier than applying with a brush. In fact, I will NEVER apply poly with a brush again! Here’s all you need to know about applying polyurethane with a paint sprayer.
These are the techniques I use when I prep my DIY furniture projects. I hope you enjoyed learning how to sand your DIY project for a flawless finish and that these tips will help you with your next project. Do you have any sanding tips? Please share them in the comments below!
Thank you for stopping by. If you found this info useful, would you please take a moment and pin it to Pinterest? I’d really appreciate it!